For best results according to our knowledge GE XENSATION or Philips D2S / D2R burners should be preferred. You can have them from us with the ballasts if you wish.
The difference in light power and intensity is truly REMARKABLE between the 35W and 50W operation states. There is no question whatsoever about that!
Due to the systems remarkable lumen / power boost gain it is suitable for OFFROAD vehicle use in dricing or extralights / auxiliary lights and Xenon HID diving lamps / other portable applications where compact size and high efficiency is valued. The heat production is slightly increased but the ballast is still usable even in portable applications due to the lamps high efficiency and low heat production.
The ballast unit is not DOT or E-approved for road use.
The compact ballast size with separate starter (distance from ballast to starter approx. 50cm original, can be up to 10meters) makes also possible using this ballast in motorcycle xenon / snowmobile xenon applications and in competition use (enduro / track).
SPECIFICATION FOR 50W BOOST HID BALLAST:
Product: Metal Halide HID ballast 35W/50W + igniter
Measurements:
L80mm x W55mm x H24mm (BALLAST)
L53mm x W47mm x H25mm (IGNITER)
Input Voltage Range: | 10 - 16 VDC, battery operation |
Operating Temperature: | -20°C to 105°C, case temperature |
Efficiency: | 89%+- 2% depending on lamp voltage |
Power Output Range: | 35W nominal / 50W boost |
Lamp Voltage: | 50V to 150V |
Lamp Current Mode: | Square wave |
Output Ripple: | < 3% |
|
Ignition Time: | maximum 1.2 seconds |
Cooling: | Thermal heatsink |
Lamp Types: | D2S, D2R, MPXL-DL35,(-DL50), (-RP50), HTI S35/12 Operation Mode: DC
|
Item Specific Specs:
- 35W nominal /
50 watt boost operation
- Safety igniter/ AMP socket
- Internal voltage protection
- Instant hot restrike capability
STAGE 3 HID 35 / 50W XENON CONVERSION KITS
- H1 HID CONVERSION 600 EUR €
- H7 HID CONVERSION 600 EUR €
VAT 0%
| To order, please contact info@xenonvalot.com |
The kits utilise a General Electric (GE) XENSATION 5000K Bulb with a directly compatible base design for H1 and H7 applications. Please see technical specifications here:
Document 1
::
Document 2
|
TECHNICAL NOTICE!
Metal halide lamps produce 5 times the light output of Halogen (90-95 lumens per watt compared to 20-25 lumens per watt), at a higher Kelvin color temperature.
No filament to break in the lamp and better shock resistance than ordinary halogen lamps have. The efficient spectral characteristics of Metal Halide burners enable to project farther than any halogen or “xenon gas” equipped lights. The 3200 Lumen HID lamp operates at 4300 Kelvin. Can also be had in 6000K , 7000K and 8000K upon request.
-Lumens are how much light a lamp produces, the higher the number the brighter the light!
-Kelvin color temperature is the color of light the lamp produces, the higher the number the whiter the light resulting in truer colors and better Color Rendering CRI!
Ask for more information or leave an order to our sales at
info@xenonvalot.com or give us a ring anytime at +358400935356.
Please contact us and find out more about our products and services info@xenonvalot.com
>> PRODUCT CATEGORIES:
HID CONVERSION KITS | LED WEDGE BULBS | COMPLETE XENON HID SYSTEMS | 50W BOOST BALLAST *NEW*
The new revolutionary 35W / 50W boost ballast design is capable of producing 5200-5700lm from a single high quality D2 type burner (for example: Philips D2S / Philips D2R, Philips MPXL-DL35, MPXL-DL50, MPXL-RP50, GE Xensation and Osram D2S / D2R, HTI S 35 / 12). This lumen gain is achieved by boosting the lamp(ballast) wattage from original 35W to amazing 50W with lumen gains from original 3200lm up to 5700lm from a single D2 burner!